1. You are here:  
  2. Home
  3. Electrochemistry
  4. Material testing
  5. Specifications

Specifications

  • Temperature range -35 °C to +150 °C
  • Temperature accuracy ±0.3 °C
  • Computer Interface USB 2.0
  • Mains voltage 115 V/230 V 50/60 Hz
  • Power consumption 250 W
  • Dimension 400 x 313 x 385 mm (L x W x H)
  • Weight 8 kg

Insulation material Fiber Alumina
Heating System

Super Kanthal 1350°C wire built in a cement cylinder
Temperature Range

Ambient up to 1100°C

Temperature Controller

PM6 Watlow PID controller

Temperature Sensors

Two K-Type Thermocouples (one for furnace, one for sample)

Temperature Control Accuracy

Better than +/-1°C

Temperature scan

adjustable (from 0.1 °C/min to 20 °C/min)
Safety Features Emergency stop button
Buzzer sound alarm
Temperature safety limit

Generator

  • Frequency Range 10 μHz to 35 MHz
  • Voltage range +/-100 μV to +/-10 V DC + peak AC

Measurement Ranges

  • Inductance 10 nH to 10 kH
  • Capacitance 1 pF to 1000 μF
  • Resistance 1 mΩ to 500 MΩ
  • Basic Accuracy 0.1%

MCM 10

  • Conductivity ranges: 6 ranges from 2 μS/cm to 0.2 S/cm
  • Conductivity resolution: 0.05% of dynamic range
  • Conductivity accuracy: < 4% of the 2 μS/cm // < 2% of the 20 μS/cm range and 0.2 S/cm range // < 1% of all other ranges
  • Acquisition time: < 500 ms/channel each frequency
  • Frequency range (FRA): 100 Hz – 50 kHz
  • External Dimension: 290 x 340 x 63 mm (W x D x H)
  • Weight: 1 kg
  • Computer connection: USB 2.0
  • AC input: 100-240 VAC, 50 – 60 Hz  < 15 W

WTSH 10

  • Heating/cooling type: air cooled Peltier cells stack
  • Temperature range: -40 °C to +150 °C
  • Temperature Accuracy: +/-0.2% (typ.) +/-0.1 °C
  • Temperature matching: +/-0.2 °C sample to sample
  • Number of samples:10 slots for 12 mm vials
  • Auxiliary input: PT1000 temperature sensor
  • External Dimension: 290 x 340 x 375 mm (W x D x H)
  • Weight: 6 kg
  • Computer connection: USB 2.0
  • AC input: 90 – 260 VAC, 50 – 60 Hz  < 250 W

HTCC

  • Cell type: Parallel plates platinized platinum on glass holder
  • Connections: 2-wire (l = 70 cm each)
  • Cell factor: K = 1 (nominal) +/- 5%
  • Minimal sample volume: 0.5 – 1.0 mL
  • Temperature range: -50 °C to +180 °C
  • Temperature ramp (max): 1 °C/min (to avoid platinum detachment)