Quick Links   Electrochemistry
 
   
Electrochemistry
Electrochemical accessories
Fuel Cells and MEA
   
 

Potentiostat / Galvanostat / EIS

SP-50
Simplicity and Performance
The SP-50 is an economical, value oriented potentiostat/galvanostat designed to address applications in general electrochemistry and corrosion. It offers good performance for a small price tag. Contained in a simple, compact chassis, the SP-50 is targeted for new researchers in the field of electrochemistry.
 
  • Current ranges: 10 µA up to 800 mA with a 760 pA resolution
  • ± 10V Reference Voltage with a resolution programmable from 300 µV down to 5 µV
  • Time base: 20 µs
  • Ethernet 10/100 baseT and USB2 communication
  • 2,3,4 and 5 terminal measurements
  • Supplied with the 32-bits Windows-based EC-Lab® Express electrochemistry software (NT, 2000, XP and Vista).

Click here to download a SP-50 brochure (PDF)

 
SP-150
Simple and Powerful in a versatile chassis
The SP-150 potentiostat is an economical research-grade potentiostat. With its modular chassis, this instrument can be customized to address all applications in the area of classical electrochemistry.
The SP-150 potentiostat can be upgraded at purchase or at a later date with an EIS measurement option, a low current option (1 nA range) and external power boosters (2, 5, 10, 20, 80 A).
It is the only instrument on the market capable of switching at 10 uS from a potential control to a current control.
 
  • Current ranges: 10 µA up to 800 mA with a 760 pA resolution
  • ± 10V Reference Voltage with a resolution programmable from 300 µV down to 5 µV
  • Time base: 20 µs
  • Techniques include voltammetry, corrosion, waveform programming, fuel cell and battery testing, and EIS.
  • Plug-in options available
    • Impedance capable - 10 µHz to 1 MHz
    • Low current - 100 fA minimum current
    • High current - additional external 2 A, 5 A, 10 A, 20 A, 80 A boosters available
  • Ethernet 10/100 baseT and USB2 communication
  • 2,3,4 and 5 terminal measurements
  • Supplied with the 32-bits Windows-based
    EC-Lab® Express and EC-Lab® electrochemistry software (NT, 2000, XP and Vista).

Click here to download a SP-150 brochure (PDF)
Click here to download a booster & e-load brochure (PDF)

 
SP-200
A Unique combination of high performances and transportability

The standard potentiostat in the SP-200 provides +/-12 volts compliance, +/- 10 V reference control, and a maximum current of +/- 500 mA. A range of nine intelligent bandwidths ensures the stability of the SP-200 in a wide variety of experimental conditions.

 

The SP-200 is a floating instrument, allowing it to be used with grounded cells, autoclaves, and in glove boxes. Additionally, on-site corrosion experiments can be performed thanks to its transportability.

  • EIS measurement up to: 3 MHz (1%, 1°), 7 MHz (3%, 3°) (with optional Z board)
  • Current ranges: 0.5 A to 1 μA (9 ranges)
  • 100 nA and 10 nA ranges with gain
  • Current resolution: 760 fA (standard board)
  • Floating Mode
  • Analog filtering
  • Calibration board
  • Full stability control mode (9 bandwidths)
  • Supplied with the 32-bits Windows-based
    EC-Lab® electrochemistry software (NT, 2000, XP and Vista).

SP-200
Click here to download a SP-200 brochure (PDF)

 
SP-300
Breakthrough Technology - A New Generation of super potentiostat
SP-300 is a state-of-the-art research grade potentiostat/galvanostat/FRA with remarkable specifications. It is the newest benchmark in the Bio-logic product range. Drawing upon Bio-logic’s long history of flexible and modular potentiostat design, the breakthrough technology incorporated in the SP-300 results in exceptional performance.

The standard potentiostat in the SP-300 provides +/-12 volts compliance, +/- 10 V reference control, and a maximum current of +/- 500 mA.

A novel 48 V/1 A booster kit has been developed to address applications requiring higher voltages.

A range of nine intelligent bandwidths ensures the stability of the SP-300 in a wide variety of experimental conditions.

 

The SP-300 is a floating instrument, allowing it to be used with grounded cells, autoclaves, and in glove boxes.

  • Compliance and control voltage: +/- 48 V (with optional 1A, +/- 48V booster board)
  • EIS measurement up to: 3 MHz (1%, 1°), 7 MHz (3%, 3°) (with optional Z board)
  • Current ranges: 1 A to 1 μA (9 ranges)
  • 100 nA and 10 nA ranges with gain
  • Current resolution: 760 fA (standard board)
  • Floating Mode
  • Analog filtering
  • Calibration board
  • Full stability control mode (9 bandwidths)
  • Supplied with the 32-bits Windows-based
    EC-Lab® electrochemistry software (NT, 2000, XP and Vista).

Click here to download a SP-300 brochure (PDF)

 
VSP®
A new generation of versatile instruments ... designed for ALL your electrochemical applications
The VSP is a modular potentiostat with research grade specifications.
With its modular chassis, the VSP can be equipped with additional capabilities, including a low current option, impedance, and additional potentiostat channels, all via its unique plug-in modules.
Each potentiostat installed in the VSP can be connected to an external current booster channel (2, 5, 10, 20, or 80 amps).
All this versatility, plus its ability to switch from potential control to current control in 10 uS, makes it the perfect choice for any electrochemical application.
 
  • Automatic current ranging from 1 nA up to 400 mA full scale
  • 20 V Adjustable Reference (Scanning) Voltage
  • Time base: 20 µs
  • Techniques include voltammetry, corrosion, waveform programming, fuel cell and battery testing, and EIS.
  • Plug-in options available
    • Impedance capable - 10 µHz to 1 MHz
    • Low current - 100 fA minimum current
    • High current - 4 A module
    • High current - additional external 2 A, 5 A, 10 A, 20 A, 80 A boosters available
    • Additional potentiostat for bi-potentiostat applications
  • Ethernet 10/100 baseT and USB2 communication
  • 2,3,4 and 5 terminal measurements
  • Supplied with the 32-bits Windows-based
    EC-Lab® Express and EC-Lab® electrochemistry software (NT, 2000, XP and Vista).

Click here to download a VSP® brochure (PDF)
Click here to download a booster & e-load brochure (PDF)

 
VMP®3
The world’s best multichannel instrument ...
... designed to address all your electrochemical applications
The VMP3 is a research-grade multi-channel potentiostat.
Designed with a modular chassis, up to 16 independent potentiostat channels can be installed.
The VMP3 can be equipped with additional capabilities, including low current modules, impedance and high current via plug-in modules.
Each potentiostat installed in the VMP3 can be connected to an external current booster channel (2, 5, 10, 20 or 80 amps. Each channel of the VMP3 can switch from current to potential control in 10 uS, making it ideal for battery studies.
 
 
  • From 1 to 16 channels
  • Complex impedance measurements on all channels (1-16) simultaneously and /or independently from 10µHz to 500kHz (with the EIS option)
  • Automatic current ranging from 1 nA up to 400 mA full scale
  • 20 V Adjustable Reference (Scanning) Voltage
  • Time base: 20 µs
  • Techniques include voltammetry, corrosion, waveform programming, fuel cell and battery testing, and EIS.
  • Plug-in options available
    • Impedance capable - 10 µHz to 1 MHz
    • Low current - 100 fA minimum current
    • High current - 4 A and 8 A modules
    • High current - additional external 2 A, 5 A, 10 A, 20 A, 80 A boosters available
    • Additional potentiostat
  • Ethernet 10/100 baseT and USB2 communication
  • 2,3,4 and 5 terminal measurements
  • Supplied with the 32-bits Windows-based
    EC-Lab® Express and EC-Lab® electrochemistry software (NT, 2000, XP and Vista).
Click here to download a VMP®3 brochure in English (PDF)
Click here to download a booster & e-load brochure in English (PDF)

Note: the VMP®3 replaces the VMP®2. The VMP®2 is still supported and its options can still be ordered.

 

Boosters for SP-150, VSP & VMP3
Boost your potentiostat
Boosters and load boxes are available to expand the capabilities of each channel of your Bio-Logic potentiostat/galvanostat. The modular design of our boosters and loads allows them to be installed in the potentiostat chassis, or connected externally.
 
 

CONFIGURATIONS

  • External boosters:
    • ±2 A, ±5 A, ±10 A, ±20 A on ±10 V adjustable from -20 to +20 V
    • ±80 A on ±3 V
  • Internal kit: ±4 A (VSP&VMP3 only), ±8 A (VMP3 only); 20 V
  • Electronic loads: External and Internal: 500 W (50 A / 10 V)

GENERAL SPECIFICATIONS:

  • Booster current range included in the potentiostat autoranging
  • 20 V Adjustable Reference Voltage (except 80 A)
  • EIS capability
  • 500 W electronic load with two current ranges
Click here to download a booster & e-load brochure in English (PDF)

See also the VMP3B-80, VMP3B-100 boosters and LB-500 e-load.

 

VMP3 & [2x2A+5A+10A] booster
HCP-803 & VMP3B-80
High current potentiostat (+/-80A +/-3V) with EIS
The HCP-803, a single channel potentiostat with built-in 80 A booster, is designed to address applications in the development and testing of fuel cells, batteries, and super-capacitors.
 
  • +/- 80A (Automatic current ranging from 1 nA up to 400 mA full scale when booster is disconnected)
  • +/-4V @40A, +/-3V @80A (20 V Adjustable Reference (Scanning) Voltage when booster is disconnected)
  • Time base: 20 µs
  • Techniques include voltammetry, corrosion, constant load and power, charge/discharge cycling, current or potential pulsing and EIS.
  • Impedance spectroscopy from 10 µHz to 10 kHz (up to 1 MHz when booster is disconnected)
  • Ethernet 10/100 baseT and USB2 communication
  • 2,3,4 and 5 terminal measurements
  • Supplied with the 32-bits Windows-based
    EC-Lab® Express and EC-Lab® electrochemistry software (NT, 2000, XP and Vista).
Click here to download an HCP-803 & VMP3B-80 brochure (PDF)

 

HCP-1005 & VMP3B-100
High current potentiostat with EIS for Li-ion, Ni-Cd, Ni-MH battery testing
The HCP-1005, a single channel potentiostat with built-in 100 A booster, is designed for the testing of Li-ion, Ni-Cd, Ni-MH batteries.
 
  • +/- 100A (Automatic current ranging from 1 nA up to 400 mA full scale when booster is disconnected)
  • 0.6V-5V @ 100A (20 V Adjustable Reference (Scanning) Voltage when booster is  disconnected)
  • Time base: 200 µs
  • Techniques include voltammetry, corrosion, constant load and power, charge/discharge cycling, current or potential pulsing and EIS.
  • Impedance spectroscopy from 10 µHz to 10 kHz (up to 1 MHz when booster is disconnected)
  • Temperature probe with conditional experiment limits.
  • Ethernet 10/100 baseT and USB2 communication
  • 2,3,4 and 5 terminal measurements
  • Supplied with the 32-bits Windows-based EC-Lab® electrochemistry software (NT, 2000, XP and Vista).
Click here to download an HCP-1005 & VMP3B-100 brochure (PDF)

 

CLB-500 & LB-500
A unique software controlled 500 W (50 A/10 V) electronic load
The CLB-500, a controlled electronic load box, is specially designed for the latest research on devices delivering energy from renewable sources. The CLB-500 couples an electronic load with an EIS capable potentiostat in the same compact chassis. This controlled electronic load, which can handle up to a 500 W load at 50 A / 10 V, is specially dedicated to applications which supplied energy but don’t need any power for charge like the study of fuel cells and photovoltaic cells. Two configurations are available, the controlled stand-alone CLB-500, and the external LB-500. The LB-500 is installed into an external chassis and is controlled by an existing Bio-Logic system, such as the SP-150, VSP, VMP3, or VMP2. The CLB-500 can be disconnected to use the system as a research grade potentiostat/galvanostat.
 
  • Two current ranges: 5 A and 50 A (automatic current ranging from 1 nA up to 400 mA without electronic load)
  • Time base: 20 µs
  • Techniques include voltammetry, corrosion, constant load and power, current or potential pulsing and EIS.
  • Impedance spectroscopy from 10 µHz up to 10 kHz (up to 1 MHz without electronic load)
  • Compliance of 10 V (without electronic load: 20 V adjustable Reference (scanning) Voltage)
  • Ethernet 10/100 baseT and USB2 communication
  • 2,3,4 and 5 terminal measurements
  • Supplied with the 32-bits Windows-based EC-Lab® electrochemistry software (NT, 2000, XP and Vista).
Click here to download an CLB-500 & LB-500 brochure (PDF)

 

EPP-4000
Electrochemical plating made easy
The EPP-4000 is a single channel potentiostat designed to address applications in the pulse plating electrochemistry market. With easy to use waveform programming software, complicated pulse waveforms can be created, applied and monitored.
 
  • Automatic current ranging from 1 nA up to 4A full scale
  • 20 V Adjustable Reference (scanning) voltage
  • Time base: 20 µs
  • Flexible waveform programming techniques
  • Ethernet 10/100 baseT and USB2 communication
  • Supplied with the 32-bits Windows-based
    EC-Lab® Express and EC-Lab® electrochemistry software (NT, 2000, XP and Vista).
Click here to download an EPP-4000 brochure (PDF)

 

 

BiStat
Two potentiostats in one box
  • 2 channels fully independent or synchronized
  • 1st channel: From 100 fA up to 400 mA
  • 2nd channel: From 1 nA up to 400 mA in standard
  • Current autoranging
  • Rotating electrode control
  • Time base: 20 µs
  • Ethernet 10/100 baseT and USB2 communication
  • 2,3,4 and 5 terminal measurements
  • Supplied with the 32-bits Windows-based
    EC-Lab® Express and EC-Lab® electrochemistry software (NT, 2000, XP and Vista).
Click here to download a BiStat brochure (PDF)

 

VMP® multichannel potentiostat/galvanostat
For Sensors and intercalation compounds studies
 
  • 8 or 16 channels
  • From 3 pA up to 10mA
  • Ethernet 10 baseT communication
  • 20 ms Time-base
  • Supplied with the 32-bits Windows-based EC-Lab® electrochemistry software (NT, 2000, XP and Vista).
Click here to download a VMP® brochure (PDF)

 

 
     
   
Privacy Policy | Sitemap | Contact us
Copyright 2009 INSPIRION